| Radios | 2.4 GHz 802.11b/g/n client access radio |
| 5 GHz 802.11a/n/ac client access radio | |
| 2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio | |
| Operating bands | 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support |
| Concurrent operations of all four radios | |
| Supported frequency bands (country-specific restrictions apply): | |
| 2.412-2.484 GHz | |
| 5.150-5.250 GHz (UNII-1) | |
| 5.250-5.350 GHZ (UNII-2) | |
| 5.470-5.600, 5.660-5.725 GHz (UNII-2e) | |
| 5.725 -5.825 GHz (UNII-3) | |
| 802.11ac and 802.11n Capabilities | 2 x 2 multiple input, multiple output (MIMO) with two spatial streams |
| SU-MIMO and MU-MIMO support | |
| Maximal ratio combining (MRC) & Beamforming | |
| 20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac) | |
| Up to 256 QAM on both 2.4 GHz and 5 GHz bands | |
| Packet aggregation | |
| Interfaces | 1x 10/100/1000 BASE-T Ethernet (RJ45) input |
| 1x Gigabet Ethernet (RJ45) with 802.3af Power over Ethernet output | |
| 3x Gigabit Ethernet (RJ45) outputs | |
| Power | Power over Ethernet: 37 - 57 (802.3at compatible) |
| Power consumption: 25W max (802.3at) | |
| 802.3af operating mode disables PoE out | |
| Power over Ethernet injector sold separately | |
| Quality of Service | Advanced Power Save (U-APSD) |
| WMM Access Categories with DSCP and 802.1p support | |
| Layer 7 application traffic identification and shaping | |
| Mobility | PMK, OKC, and 802.11r for fast Layer 2 roaming Distributed or centralized layer 3 roaming |
| LED Indicators | 4x 2 Ethernet status for Ethernet ports |
| 1 power/booting/firmware upgrade status | |
| Antenna | Integrated omni-directional antennas (3.7 dBi gain at 2.4 GHz, 4.8 dBi gain at 5 GHz) |
| Dimensions | 6.1” x 4.3” x 0.9” (155 mm x 110 mm x 23 mm), not including mount foot or mount plate |
| Weight | 14.4 oz (409 g) |
